Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If the OBI110 was functioning correctly prior, this is likely that the VoIP server configuration changed. Changing the VoIP server(s) also regenerates the SIP user and password credentials. These need to be updated on the OBI110 or the device will not register with the VoIP server correctly. The OBI110 should appear in the NocTel control panel with the status available if it was able to register properly with the assigned VoIP serverit's possible the Line in Use voltage from your intercom/paging system varies such that some calls fall outside the expected value.

Also ensure the OBI110 is cabled up properly. The most likely case would be the wrong cable used to connect the intercom/paging system to the OBI110's Line port or connecting to the Phone port instead of the Line port.

Busy Signal When Dialing the OBI110 Extension

...